Tools

Heavy-duty connector remains flexible at below freezing temperaturesEyelet diameter 1/4" and M6 weather-protected 15 amp fusePremium quick connector permanent battery leadsIndustry standard 2-pin SAE connector

Easily installs oil pump seal below gear surface for a no-leak fitFor use on all Big Twin aluminum oil pumps (except Twin Cam/M8)Made in the U.S.A.

Used to remove wet and dry clutch hubs without removing clutch release rod4 bolts included for dry clutch removalMade in the U.S.A.

Tir Tool - Pinion Shaft/Sprocket Shaft - Black - Universal Dh-Rot-K

Protects left engine case while servicing inner balancer bearingsAluminum blocks have inserted Delrin? pads that rest against case to prevent marring and to support the caseKeeps case level when using bearing pullers to remove balancer inner bearingsMade...

For use on the Milwaukee Eight™ engine seriesThe JIMS Milwaukee-Eight® Softail® engine stand is designed to work on all Milwaukee-Eight® Softail engines. It is designed with the motorcycle technician in mind, securely mounting the engine to a stand and...

Premium quick connect permanent battery leads for power sport batteries, each with weather protected connection system and cable1/4? / M6 ringletsIndustry standard 2-pole SAE connector15A fuse with a cable max rating of 5 Amp40??C/-40??F very low...

Versatile design will remove chain pins, press master-link plates and rivet hollow nose and soft nose (quad stake) master link pins on O-ring and non O-ring type chainsWill press, break and rivet 520, 525 and 530 chains with one convenient toolPBR =...

Use to install the main bearing (Harley-Davidson® #8905) to the correct depthMade in the U.S.A.

Time-saving tool removes worn shift shaft bushings in Big Twin primaries without having to remove he inner primaryTools installs new bushings to the correct locationMade in the U.S.A.

Inflate a standard tire in under 3 minutes with this powerful 12V compressorFor quick and easy use, plug directly into your power outlet adapterIncludes a 16' hose with a quick-release coupler, a canvas bag for storage and an easy-to-read gaugeA bright...

Support plate gives a non-marring, flat surface to push piston bottoms against when installing rings or cylindersMade in the U.S.A.