Maintenance

High quality Motion Pro? standard bit driver T-handleIncludes Japanese Industrial Standard (JIS) cross-head bits #1, #2, and #3; also accepts all common driver bitsFeatures 3 drive heads, one at end of shaft and 2 at each end of handle with magnets to...

Innovative internal plug retention systemUse with a 17 mm wrenchSlim skeleton profileLightweight

Promotional Items Vendor Replacement 10'X10' Canopy Hardware - Complete Leg 31-11811-B

Fits 2014 KTM XC models and all 2013-2014 Husaberg with WP 4860 4CS forksFor removing and installing left hand and right hand adjustable fork capsAllows proper torque of the fork cap assemblies during installation17 mm hex headAlways wear safety glasses...

Heat-treated steelSee application chart below KTM -- 450 SMR -- (2008, 2009, 2012); KTM -- 250 SX-F -- (2011, 2013, 2012, 2014, 2015); KTM -- 450 SX-F -- (2012, 2008, 2007, 2009, 2011, 2010); KTM -- 250 XCF-W 4-Stroke -- (2013, 2012, 2014, 2015); KTM --...

Tool design allows for effortless retrieval of damping rod after spring installationOne-piece design means no lost partsFive thread sizes in one tool: M10 x 1.0, M10 x 1.25, M12 x 1.0, M12 x 1.25 and M14 x 1.0Rod includes downward-facing bleed port to...

Fits 36 mm axle nutsFacilitates loosening and tightening of the hard-to-reach rear axle nut on Harley-Davidson? baggersCaptive swivel extension with a durable plastic sleeve protects exhaust systemRated for up to 175 foot-pounds of torque

Keep your foam filter in like-new conditionStarts thin for deep, even penetration and dries to an even-coating, high-tack shield that traps dirt, dust and gritDeveloped and produced by Texaco exclusively for Twin AirExceeds the strictest standards on...

Eliminates the need to wrap the fork tube with tapeProtects the fork seal and wiper of inverted forks from damage by the bushing groove during installationFitment size is marked on each bullet for easy identification

Year-round useVery good wear protection propertiesReduces fuel consumptionAvailable in 1L bottles

Rubber non-skid pad mounts on top surface of center jack with self-adhesive backingDesigned for K&L? Center Jack

Durable enough to size C630 bronze and cast iron valve guide materialsMade in the U.S.A.