Lang Tools

14-pc. set of 4" x 1/4" feeler gauge blades, thickness .002" through .015"1/4" wide gauge blades can be used to check valve clearances of small-diameter bucket and shim-type valve trainsBlades are...

Durable, E-Z Grip handle for comfort and a positive gripPipe-threaded end will accept airline quick-disconnect fittingsDesigned for use on hard-to-reach wheelsMade in the U.S.A.

Durable, E-Z Grip handle for comfort and a positive grip1/4" NPT pipe-threaded end will accept airline quick-disconnect fittingsSealed-ball air chuck is extended 1" from handle to allow access to...

Replacement bits for Lang? Bolt Ratcheting Wrench

Lang Tools Brake Caliper Press - Small 277

Metal clip can be attached to the gauge, then the gauge can be clipped to the frame or handlebars, allowing hands-free testingIncludes 10 mm, 12 mm, 14 mm and 18 mm long reach adapters to test most...

Specialty nuts are used to hold down cylinder sleeves during serviceAllow motor to be turned over with heads off

Set consists of one 15?? off-set wrench, one 15?? reverse off-set wrench, one flat wrench, and four bits (sizes #1 and #2 Phillips, 1/4" and 9/32" slotted)Made in the U.S.A.

Remove and install the lock ring on fuel tanksAllows access to the fuel filter and pump

Designed to cut holes and internal radii in gaskets and other soft materialTen punch sizes: 1/4", 5/16", 1/4", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1"Contains 11 pieces, 10 punches and one...