These hydraulic lifter cams are capable of 6000-plus rpm with stock springs and no valve floatExcellent in the 2800-6500 rpm rangeDesigned for big-inch stroker motors with head workUses stock...
EZ-install pushrods eliminate the need to disassemble your rocker boxes or remove the gas tank when changing cams or doing maintenanceMade in the U.S.A.
EZ-install pushrods eliminate the need to disassemble your rocker boxes or remove the gas tank when changing cams or doing maintenanceMade in the U.S.A.
Used to measure the outside diameter of cam drive gearsMade in the U.S.A.There are two basic differences between 90-99 cam gear sizes and earlier years. The overall range of gear pin measurements...
Used to measure the outside diameter of cam drive gearsMade in the U.S.A.There are two basic differences between 90-99 cam gear sizes and earlier years. The overall range of gear pin measurements...
Cams with .600 lift can easily be accommodated when used with high-lift springsMade from T-6 aluminum, collars are lightweight, hard-coated and very strongFor 74" and 80" motorsMade in the U.S.A.
Provide correct spring force for any of our performance cams when used in 74" and 80" motorsMax lift; installation does not require complicated machining but does require proper valvetrain setupMade...
The original Andrews ignition coil adds great performance with a classic lookReplacement coils deliver 30,000+ voltsProduce more voltage than a stock coilMade in the U.S.A.
The original Andrews ignition coil adds great performance with a classic lookReplacement coils deliver 30,000+ voltsProduce more voltage than a stock coilMade in the U.S.A.
Designed with a combination of shorter durations and higher lifts to offer the advantages of a broad torque output through the entire rpm rangeDesigned for hydraulics, but could be run with...
